Home   |   Information   |   Testimonials   |   Photos   |   Articles   |   For Sale   |   Wanted   |   Links   |   Contact Us
Custom Marlin Lever Action Parts

Marlin barrel band with Picatinny rail attachment for 1894's & 336's.

This is a clamshell type arrangement manufactured from Aircraft Grade 6061-T651 aluminum and secured with a Flat Head Cap Screw (FHCS) the same diameter as the factory cross screw. All threaded holes have stainless steel Heli-Coil inserts, installed after hard anodizing flat black. The barrel band may be attached with the rail on either the left or the right side. A light, laser, sling attachment, etc. may be attached very easily to the Picatinny rail.

They are currently in stock and available for 1894's chambered in .357 Magnum, .41 Magnum, and .44 Magnum and 336's chambered in .30-30 Winchester (possibly .35 Remington). Some factory barrel bands are located closer to the front sight than others and will require removing a small bit of material from the back of the front sight for proper clearance. These will only fit your rifle if it has a front barrel band.

The price for the barrel band and one section of rail is $140, and includes USPS Priority Mail delivery anywhere in the United States. Please do not add additional funds for delivery!

Unfortunately, these cannot be shipped outside of the United States. The billing and shipping addresses must be within the United States.

For Marlin 336's chambered in .30-30 Winchester and .35 Remington, and 1894's chambered in either .44 Magnum or .41 Magnum, click below. Do not add shipping!

Quantity:      

For Marlin 1894's chambered in .357 Magnum, click below. Do not add shipping!

Quantity:      

Grizzly Custom Guns Marlin Picatinny Rail for 1894 and 336

Grizzly Custom Guns Marlin Picatinny Rail for 1894 and 336

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Marlin Picatinny rail attachment for 1895's and 336's

Manufactured from Aircraft Grade 6061-T651 aluminum and secured with an 8-40 Socket Head Cap Screw (SHCS), it will slip over the end of the magazine tube. All threaded holes have stainless steel Heli-Coil inserts, installed after hard anodizing flat black. The rail mount may be attached with the rail on either the left or the right side. A light, laser, sling attachment, etc. may be attached very easily to your 1895 via the Picatinny rail.

Also included is a new (8-40) dovetail stud that slides into the barrel slot and a longer 8-40 attachment screw to replace the #6 screw that Marlin installed.

They are currently in stock and available for 1895's chambered in .45-70. There were a few 336's chambered in .30-30 with the 1895 style magazine tube and I can accommodate them as well.

The price for the barrel band and one section of rail is $165, and includes USPS Priority Mail delivery anywhere in the United States. Please do not add additional funds for delivery!

Unfortunately, these cannot be shipped outside of the United States. The billing and shipping addresses must be within the United States.

For Marlin 1895's chambered in .45-70, click below. Do not add shipping!

Quantity:      

For Marlin 336's chambered in .30-30 Winchester, click below. Do not add shipping!

Quantity:      

Grizzly Custom Guns Marlin 1895 Picatinny Rail Light Mount 2

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Here is a pretty cool new item. It is a knurled thumbscrew that will replace the factory slotted screw that retains the lever in your post WWII Marlin Lever Action Centerfire Rifles. An important feature is the coin slot for tightening. Without the slot, the screw may work itself loose. It is made by AC's Weapon Enhancements and is very nice quality. They are available in matte blue for $21.25 plus postage to the US. Unfortunately, these cannot be shipped outside of the United States. The billing and shipping addresses must be within the United States. If you do not choose a shipping method, I will send them USPS First Class mail for $5.

For a blue Marlin takedown screw click below. Do not add shipping!

Quantity:      

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

They are also available in hard chrome finish for your stainless steel rifle for $26.25, plus postage. Unfortunately, these cannot be shipped outside of the United States. The billing and shipping addresses must be within the United States. If you do not choose a shipping method, I will send them USPS First Class mail for $5.

For a stainless (Hard Chrome) Marlin takedown screw click below. Do not add shipping!

Quantity:      

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3-Rail Picatinny Rail fore arm replacement for Marlin 336 & 1894's with the 9-3/4" length fore arm and the barrel band-style attachment. They are machined from 6061 aluminum and are hard anodized flat black. This will not work if your forearm is retained by a cap and two-screws (see below).

The price for the Picatinny Rail forearm replacement is $299, and includes USPS Priority Mail delivery anywhere in the United States. Please do not add additional funds for delivery!

For a 336 style Picatinny Rail forearm replacement, click below. Do not add shipping!

Quantity:      

Unfortunately, these cannot be shipped outside of the United States. The billing and shipping addresses must be within the United States.

Since the dimensions inside the front of the receiver and inside the barrel bands tend to vary, the rail was designed to be bedded in place. I recommend Brownells AcraGlas, dyed black. A $30 kit is available here, www. Brownells.com, and includes the black dye.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

3-Rail Picatinny Rail fore arm replacement for the Marlin 336, 1894 & 1895 with the 9-5/8" length fore arm and the cap-style attachment. They are machined from 6061 aluminum and are hard anodized flat black. This will not work if your forearm is retained by a barrel band. I am working on another version for those models.

The price for the Picatinny Rail forearm replacement is $275, and includes USPS Priority Mail delivery anywhere in the United States. Please do not add additional funds for delivery! The price does NOT include the rail on top of the barrel or the pressure pad in the right side of the forend...

Unfortunately, these cannot be shipped outside of the United States. The billing and shipping addresses must be within the United States.

For a 1895 style Picatinny Rail forearm replacement, click below. Do not add shipping!

Quantity:      

Since the dimensions inside the front of the receiver and inside the fore arm caps tend to vary, the rail was designed to be bedded in place. I recommend Brownells AcraGlas, dyed black. A $30 kit is available here, www. Brownells.com, and includes the black dye.

Grizzly Custom Guns Marlin 1895 336 1894 Picatinny Rail Weaver Forend Tactical Light Laser 2

Grizzly Custom Guns Marlin 1895 336 1894 Picatinny Rail Weaver Forend Tactical Light Laser 2

More parts coming soon !!!

Click here to email us for additional information

  Send email to Grizzly Custom   
Please note: All prices shown on the following pages include a 5% cash discount and will apply to payment with either cash or check. If you would like to pay with Visa, MasterCard, or Discover please add the 5% discount to your total.
Home | Information | Testimonials | Photos | Articles | For Sale | Wanted | Links | Contact Us