Scout Rifle Package

1* Pistol Package

1* Enhanced Pistol Package

1* Elite Pistol Package

Pistol and Revolver Modifications Services requiring a refinish are marked with an asterisk (*). Pistol Sight Combinations Price Supply and install Wilson 428 Adjustable rear sight, de-horned and low mounted $205.00 Supply and install staked front sight, serrated ramp $40.00 Supply and install Retro rear sight w/ dovetailed front $140.00 Supply and install Retro rear sight for 1911 $50.00 1911 Retro rear sight, part only $30.00 Supply and install Classic Retro Sight Package - Retro rear, Silver brazed ramp front $165.00 Supply and install Classic Retro Adjustable Sight Package - Smith & Wesson adjustable rear, Silver brazed ramp front $330.00 Range test & zero w/50 rounds Gold Dot $60.00 Install roll pin into front sight, labor only $5.00 Heinie tritium front sight, part only $48.00 Install white dots (3 total) in front & rear sights, labor only $20.00 Open rear sight notch to 0.140', labor only $30.00 Supply and install Novak low mount rear sight only for 1911, black $115.00 Supply and install Novak low mount sights for 1911, black $175.00 Supply and install Novak low mount Bar-Dot sights for 1911, tritium $250.00 Supply and install Novak low mount 3-dot sights for 1911, tritium $275.00 Supply and install Novak front sight for 1911, tritium $115.00 Supply and install Novak front sight for 1911, black $75.00 Supply and fit Novak adjustable rear sight with Novak dovetail front, black $225.00 Narrow front sight to 0.110', labor only $20.00 Machine slide for Novak adjustable sights, labor only $145.00 Machine slide and install sights, labor only $125.00 Supply and install Heinie standard set for 1911, tritium $275.00 Supply and install Heinie standard set for 1911, black $195.00 Supply and install Heinie Slant Pro set for 1911, tritium $275.00 Supply and install Heinie Slant pro set for 1911, black $195.00 Wrap, contour, cut,and re-serrate Heinie rear sight, labor only $50.00 Gold line inlay for ramp front sight (front sight not included), labor only $125.00 Gold line front sight inlay (front sight not included), labor only $85.00 Supply and fit silver soldered front sight, serrated ramp $75.00 Supply and install Bo-Mar adjustable rear, fully de-horned and low melt mounted in Series 80 slides only $300.00 Supply and install Bo-Mar adjustable rear, fully de-horned and low melt mounted in Series 70 slides only $245.00 Blend end of sight dovetails into slide, labor only $15.00 IWI tritium inserts? Sorry, we don't use them as subcontractor for a variety of reasons. Sight installations include zeroing. Specifically requested ammunition may affect total price. Trigger & Action Work Price Trigger, Short, Medium, Long or 3-hole, part only $16.00 Premium Quality 1911 trigger job, includes premium trigger $135.00 Duty grade 1911 trigger job, uses factory components if suitable, labor only $85.00 Best Quality Hi-Power trigger job - uses C&S type II hammer and C&S sear $220.00 Best Quality 1911 trigger job - uses matched proprietary action components. Includes hammer, sear, disconnector, hammer strut, and your choice of long, medium or short trigger $300.00 Fit trigger, labor only $25.00 Proprietary tool steel sear, part only $48.00 High-cut & bob hammer to prevent bite, labor only $45.00 Hammer, sear, disconnector set, part only $119.00 Colt Commander style hammer, part only $20.00 C&S Tactical hammer for 1911, part only $45.00 Supply and fit trigger to pistol $41.00 Proprietary tool steel disconnector, part only $24.00 Supply and install disconnector $30.00 Auto Pistol Frame Work and Accessories Price Custom light rail and adapters for SureFire X200 light, part only $80.00 Supply and install Wilson ambi-safety, dehorned $150.00 Supply and install Ed Brown strong side safety, dehorned, narrowed $80.00 Supply and install Wilson #6 narrow strong side speed safety, dehorned $80.00 Supply and install King's safety, dehorn, & narrow $80.00 Fit & adjust thumb safety, labor only $20.00 Supply and install Ed Brown ambi-safety, dehorned, narrowed $150.00 Custom lowered thumb safety 1911, RH strong side only, on customer supplied part, labor only $100.00 Supply and install Colt style thumb safety, dehorned $80.00 Supply and shorten stock screws & bushings $45.00 Stock screw set, slotted $8.00 Stock screw bushings, thin, part only $12.50 Stake stock screw bushings, labor only $15.00 Stock screw bushings, part only $10.00 Complete Wolff 1911 spring set includes recoil spring, extra power firing pin spring, sear spring , and main spring $18.00 Supply and install Wilson #414B bulletproof slide stop, blue only $70.00 Serrate bottom of slide stop to assist in manual lock back, labor only $50.00 Flatten and angle slide stop bottom, checker @ 75 lpi, labor only $55.00 Flatten end of slide stop pin & chamfer pin hole, labor only $50.00 Supply and install EGW slide stop, blue or stainless, $70.00 Supply and install Ed Brown serrated slide stop, blue or stainless $70.00 Supply and install factory Colt serrated slide stop, blue $70.00 Slide stop, Colt, part only $35.00 Adjust Slide Stop, labor only $15.00 Serrate 1911 front strap - Includes truing front strap 30 lpi w/ points on top & bottom, labor only $165.00 Serrate 1911 front strap - Includes truing front strap 20 & 25 lpi w/ points on top & bottom, labor only $140.00 Round butt conversion, including custom grips. $300.00 Restake plunger tube $15.00 Wolff recoil spring $7.50 Stainless steel barstock plunger tube, part only $13.00 Supply and install plunger tube, new barstock steel, staked $40.00 Blue barstock plunger tube, part only $13.00 Supply and serrate mainspring housing w/ custom pattern $110.00 Lanyard loop conversion on your MSH $65.00 Main spring housing, blend to frame, labor only $35.00 Supply and install Baer 20lpi serrated flat mainspring housing fit to frame $80.00 Supply and install Smith and Alexander magazine well, blended into frame $175.00 Supply and install weld on mag-well $350.00 Remove magazine disconnect, labor only $15.00 Light rail installed on customer's gun, includes adapters for X200 pistol light. $135.00 Lanyard loop conversion on your MSH, labor only $65.00 High cut and radius front strap, labor only $70.00 Shorten tang on beavertail grip safety for shorter overall length, labor only $20.00 Sensitize grip safety, labor only $20.00 Fit mag catch, labor only $15.00 Recut Feed Ramp, 31degrees x 0.420', labor only $60.00 Polish feed ramp and throat barrel, labor only $55.00 Supply and install Wilson extended ejector $60.00 Supply and install replacement Colt ejector $30.00 Install pin into ejector only, labor only $30.00 Checker slide stop, labor only $40.00 Re-checker mag catch, labor only $25.00 Bobtail conversion, including MSH $185.00 Bevel magazine well, 1911, hand filed, labor only $65.00 Supply and install Wilson #298 grip safety with speed bump for 1911 (Welding may be required for perfect fit) $140.00 Supply and install S&A gripsafety $140.00 Supply and install McCormick grip safety (not used on Springfield Armory) (Welding may be required for perfect fit) $140.00 1* back end treatment, labor only $50.00 The slide stop is one of the most frequently broken parts in the 1911. Along with fresh recoil springs and a spare extractor, no spare parts kit is complete without a spare slide stop. Reliability Work Price Repair & tune Series 80 system for correct function, labor only $25.00 Complete 1911 dependability package - Wilson Bulletproof extractor, tune ejector, polish feed ramp and throat barrel, polish breech face, chamfer firing pin hole, ream chamber if necessary $115.00 Reliability tune for 1911, minor, labor only $75.00 Auto Pistol Slide Modifications Price Serrate rear of slide @ 50lpi, labor only $60.00 Serrate rear of slide @ 40lpi, labor only $60.00 Supply and install reverse guide rod $85.00 Ream firing pin hole to 0.095' for .45ACP firing pin, labor only $10.00 Modify slide for reverse spring plug, labor only $20.00 Apply matte finish to rear of slide, labor only $45.00 Inlay logo with silver, labor only $75.00 Machine front cocking serrations on slide, cut to match rear serrations, labor only - Chuck Rogers $140.00 Machine French borders on 1911 slide, labor only $110.00 Mill slide top flat, labor only $85.00 Flatten and serrate top of slide in 'Curved Arrow' pattern, labor only $175.00 Flatten and serrate top of slide @ 50lpi, labor only $140.00 Flatten and serrate top of slide @ 40lpi, labor only $110.00 Fit & detent slide stop, labor only $15.00 Supply and install EGW square firing pin stop $40.00 Supply and install Wilson 415 bulletproof extractor $55.00 Supply and install Wilson 101 extractor $45.00 Extractor, fit, labor only $20.00 Supply and install Ed Brown Hardcore extractor, tuned $50.00 Supply and install Brownell's extractor, blue or stainless $65.00 Lower ejection port, labor only $40.00 Lower and flare back ejection port, labor only $75.00 Flare ejection port, labor only $35.00 Polish breech face and chamfer firing pin hole, labor only $25.00 Blend rear of slide to frame, labor only $30.00 Bevel and matte top rib of 'enhanced' style slides, labor only $110.00 Machine ball cuts on slide, labor only $125.00 Auto Pistol & Revolver Accuracy Work Price Fit slide and frame on steel 1911, includes welded frame rails, labor only $250.00 Tighten frame and slide, 1911, steel, labor only $125.00 Tighten frame and slide, 1911, aluminum alloy, labor only (AccuRails) $250.00 Supply, fit, and install Wilson match bushing $55.00 Fit barrel bushing, blue or stainless, labor only $35.00 Supply, fit, and blend King's barrel bushing $50.00 Supply, fit, and blend EGW bushing $60.00 Recrown pistol barrel $20.00 Supply and install Schuemann bull-barrel only $425.00 Supply and install Nowlin S/S barrel only $325.00 Supply & install Kart ramped barrel only $350.00 Supply and install Kart barrel only $255.00 Fit barrel labor only $135.00 Crown, throat, ream chamber & re-finish factory barrel, labor only $50.00 Supply and install Nowlin S/S barrel w/match bushing $385.00 Supply and install Nowlin S/S ramped barrel w/match bushing $425.00 Supply and install Kart barrel w/match bushing $315.00 We work with a variety of barrel makers, from Bar-Sto to Kart, and everyone in between. Who's got the best barrel? The one that gives you what you're looking for in price and performance. We'll make suggestions, but won't make generalized claims. Decide what you want from your gun, and we'll provide it. Want something done that's not on the list? Usually not a problem, if it's safe, and the modification makes sense to us both. Feel free to ask! Metal Prep and Finishing We dehorn for carry by removing and carefully radiusing the edges, for a smooth, appealing feel and appearance. If you want something more extreme, let us know. Metal Prep & Finishing Price Satin matte bead blast Pump or semi auto shotgun, steel receiver, labor only $65.00 Satin matte bead blast complete S/S pistol, 320 polish on slide sides, labor only $125.00 Satin matte bead blast complete pistol, labor only $65.00 Satin matte bead blast Lever rifle, complete, labor only $65.00 Satin matte bead blast Bolt rifle, complete, labor only $65.00 Satin matte bead blast & blue bolt rifle, labor only $145.00 Satin matte bead blast & blue slide and parts, labor only $85.00 Satin matte bead blast & blue complete pistol, labor only $125.00 Satin matte bead blast & blue pistol frame and parts, labor only $50.00 Satin matte bead blast & blue complete pistol, 320 polish slide flats, labor only $170.00 Polish slide flats on 1911 from... labor only $75.00 Polish frame flats from... labor only $60.00 Nitre blue pins & screws, labor only $100.00 Detail pistol for hardchrome, detail and re-fit as needed, labor only - $65 per hour, minimum one hour charge. $65.00 Dehorn auto pistol frame and all attached parts, labor only $55.00 Dehorn complete pistol, labor only $90.00 320 polish overall on lever rifle, including bluing, from... $275.00 320 polish overall on bolt rifle, including bluing, from... $275.00 Subcontract Finishes We use several outside finishers. They only have to meet one requirement - They have to be the best at what they do. Your satisfaction and my reputation demand it. Unfortunately, shipping of handguns is not cheap. This further necessitates the job being done right the first time. The prices listed below are the charges for the finish work only. The actual shipping we pay, and are charged by the finisher will be added to the cost of finishing. Prices for finishing & shipping to subcontractors can vary due to size, weight & complexity of the parts. Subcontract Finishes Price Parkerizing $190.00 Hard chrome, auto pistol frame and parts only from... $175.00 Hard chrome, long gun, with parts from... $175.00 Hard chrome, complete handgun, and all parts from... $225.00 Birdsong Black-T finish on long guns (black or Nato green) incl. shipping, from... $245.00 Birdsong Black-T finish on handguns (black or Nato green) $245.00 Birdsong Black-T finish, extra magazines, ea. $15.00 Prior to applying Black - T or any synthetic finish to an aluminum framed pistol, the frame must be anodized. Synthetic finishes do not add any surface hardness or strength to an alloy frame. Rifle and Shotgun Modifications Combat Shotgun Modifications and Accessories Price Vang Comp Barrel mods, ported, includes shipping both ways, labor only $270.00 Vang Comp Barrel mods, no ports, includes shipping both ways, labor only $215.00 Trigger job, Remington 870 or 11-87, labor only $60.00 Swage out magazine detents in new Remington's for mag tube ext, labor only $20.00 Supply and install Speed Feed stock $90.00 Smooth action slide, Remington 870, labor only $60.00 Supply and install Wilderness heavy duty sling, installed w/ sling swivels $35.00 Install sling swivel stud in pistol grip $15.00 Install custom rear sling mount for Chalker type sling - Remington only, labor only $50.00 Install custom front sling mount for Chalker type sling - Remington only, labor only $50.00 Add carry sling and swivels on 870 or 11-87 without tactical light $55.00 Add carry sling and swivels on 870 or 11-87 with tactical light $60.00 Professional Grade Shotgun Sight System - includes mounting block, modified LPA rear sight, pic-rail, and front sight - part only $275.00 Supply and install modified LPA ghostring sight system w/ relocated rear sight & mounting block & silver-soldered front sight on Remington, Mossberg, Benelli, or Winchester - Includes refinish on barrel $385.00 Supply and install modified LPA ghostring sight system w/ relocated rear sight & mounting block, including pic-rail & silver-soldered front sight, on Remington, Mossberg, Benelli, or Winchester - Includes refinish on barrel $585.00 Shotgun Sight System - includes mounting block, modified LPA rear sight, pic-rail, and front sight - part only $275.00 Shotgun front sight, part only $45.00 Rear sight and mounting block - rear sight assembly only, no front sight or pic-rail, part only $200.00 Upgrade to PG rear sight & receiver-mounted pic rail $200.00 Add for vent rib barrel $55.00 Supply and install side saddle for Benelli $40.00 Pic-rail for shotgun receiver, part only $130.00 Shotgun front sight, part only $45.00 Shorten wood or synthetic stock, cut only, labor only $25.00 Shorten & recrown shotgun barrel, labor only $35.00 Stake shell stops, Remington 870 or 11-87, labor only $15.00 Replace o-ring seal for gas system $10.00 Install Rem-Chokes in shotgun barrel, ream & tap, labor only $60.00 Upgrade rear sight to include mounting block $90.00 Ream long forcing cone, 12 or 20 ga., per barrel, labor only $40.00 Professional Grade rear sight and mounting block - rear sight assembly only, no front sight or pic-rail, part only $200.00 Supply and install Pachmayr Decelerator pad $70.00 Supply and install Pachmayr 325 Ventilated pad $55.00 Mesa Tactical 8-round shell holder $80.00 Mesa Tactical 6-round shell holder $65.00 Supply and install 9-round magazine tube extension $55.00 Giles tactical sling, 870 or 11-87, part only $55.00 Giles tactical sling, Benelli, part only $55.00 Supply Trijicon Tritium Front Sight, part only $75.00 Shorten forend on 870 to clear loading port and Side Saddle, labor only $15.00 Extended bolt handle, vertical style 11-87 w/ exchange, labor only $50.00 Supply and install shortened easy-loader on 11-87 $70.00 Detail clean & refinish, labor only $65.00 Dehorn loading and ejection ports, 870 or 11-87, labor only $55.00 Convert safety to left-handed, Remington only, labor only $55.00 Supply and install big head safety, 870 or 11-87, right hand $25.00 Supply and install LPA ghostring sight system w/ silver-soldered front sight, on Remington, Mossberg, Benelli, or Winchester - Includes refinish on barrel $295.00 Barrel center mount, weaver type, to accept Aimpoint Pic 1913 spec., labor only $195.00 Our combat shotgun modifications are done with reliability and durability as the primary concern. We don't perform certain modifications because it has been our experience that they have no value. We also select components carefully. There are always new items being introduced, and we may not be aware of them. If there is a product or service that interests you, but is not listed here, please ask about it. Modifications not listed: We can't include everything in a pricelist like this. We perform many individual modifications on a wide variety of firearms, unlike a specialty shop that only works on a select type of gun. If there is a service you'd like us to perform that is not listed, please inquire. Special projects may require additional shop time, but quality is the primary concern, and most specialty shops will take at least as long. Lever Rifle Work Price Additional cost to convert a stainless steel rifle. $100.00 Upgrade to 336A Package on 336C, 336W Forend tip w/ swivel stud 20 2 tennon screws $ Wild West trigger assembly, installed & tuned $125.00 Trigger Job on factory components, labor only $60.00 Refinish stock and forend in hand-rubbed oil, labor only, from... $200.00 Wilderness or leather sling installed, with sling swivels $40.00 Side-mount sling swivels, installed, right or left-hand $55.00 Supply and install Uncle Mike's QD sling swivels and studs only $25.00 Convert sling stud to blank screw, labor only $25.00 Slim contour Marlin forend, labor only, not including refinish $120.00 Supply and install Custom ghost-ring sight system w/ dovetail fillers $375.00 Shorten barrel only, 45-70 Marlin, labor only $95.00 Shorten and crown barrel, shorten magazine tube, labor only $130.00 Recrown barrel, labor only $65.00 Supply and install Pachmayr Decelerator recoil pad $70.00 Install low-mounted Picatinny accessory/optic rail, on barrel & receiver, fit to rear sight $330.00 Install Low-mounted Picatinny accessory/optic rail, on barrel, labor only $200.00 Modify Marlin loading port for easy unloading/downloading, labor only $45.00 Install gold bar front sight, .040 inlaid $100.00 Glass bed butt stock & forend $145.00 Deluxe dovetail fill, each, labor only $75.00 Supply and install enlarged lever loop, DRC $150.00 Wild West 'Bear-Proof' ejector, fit & tuned $35.00 Dehorn loading & ejection ports, inside & out, labor only $60.00 Cut stock to desired length for pad mount, labor only $25.00 Supply and install Galco leather butt cuff ammunition carrier $90.00 Galco leather butt cuff ammunition carrier $75.00 Bob hammer, labor only $50.00 Action smoothing, labor only $60.00 Convert 44 Magnum rifle to 1895G profile including: Cut new dovetail Make new mag tube plug Cut mag tube Misc. parts $150.00 Additional cost to convert your Marlin 336C, 336W, or 336SS including forend tip w/swivel stud, 2 tenon screws, forend tip tenon, additional dovetail cut. $100.00 Some Winchester rifles, above serial # 2,700,000 will not blue, and require a synthetic finish. Bolt Rifle Work Price Range zero and supply targets +ammo $60.00 Supply and install Tubb SpeedLock Winchester Model 70 firing pin kit, includes firing pin & chrome silicone spring $110.00 True receiver face, labor only $30.00 Supply and install Timney trigger on Remington Model 700 $175.00 Trigger job, Winchester 70 and others, labor only $70.00 Trigger job, Remington 700, labor only $50.00 Painted finish on synthetic stock, solid color, labor only $125.00 Painted finish on synthetic stock, camo colors, labor only $220.00 Supply and install Uncle Mike's sling studs (2) from... $25.00 Supply and install 3rd sling swivel stud $40.00 Supply and install sling, tan military with swivels $65.00 Supply and install Ching Sling $60.00 Dave Talley QD scope rings, part only $100.00 Badger scope rings, part only $166.00 Scope rings, 30mm Tactical Steel, part only $130.00 Modify bolt for Sako extractor $165.00 Remove & reinstall barrel, labor only $35.00 Recrown barrel, labor only $25.00 Re-cut to point up checkering, labor only $110.00 Supply and install Pachmayr flush mount sling studs and swivels installed from... $85.00 Supply and install Pachmayr Decelerator recoil pad, fit to non Monte Carlo Stock $75.00 Supply and install Pachmayr Decelerator pad, fit to Monte Carlo type stock $85.00 Install Grizzly Custom muzzle brake, contoured and blended to barrel, labor only. Not including barrel refinish. $215.00 Mount and collimate scope, labor only $25.00 Machine inlet for Super Grade bottom metal, labor only $45.00 Lighten Remington 700 receiver & bolt, labor only, from $250.00 Lap lugs on bolt and action, labor only $75.00 Install, chamber, and crown barrel, standard style, labor only $225.00 Install, chamber, and crown barrel, extractor-cut type, labor only $250.00 Grind recoil lug flat, labor only $30.00 Barrel Fluting, per flute ($150 minimum), labor only $20.00 Cut stock to desired length of pull, labor only $25.00 Cut, crown & reblue barrel, labor only $110.00 Custom throat chamber, labor only $55.00 Cryogenically treat barrel & receiver, labor only $150.00 New bolt, spiral fluted $200.00 Glass bed in synthetic or wood stock, labor only $150.00 Recontour customer's barrel $125.00 Badger long range scope base, part only $155.00 Supply and install Badger bolt knob $140.00 Adjust chamber for proper headspace, labor only $30.00 Modify receiver & scope base for 8-40 screws, labor only $80.00 Anklebiters and O'Shyttes Price sheets and work estimates sometimes don't cover everything, and usually, some little problem pops up that neither of us were aware of, nor expected. If it's just a little anklebiter, such as a loose plunger tube, we'll fix it without wasting the time to contact you. If a full blown O'Shytte surfaces, such as a crack in a frame previously unnoticed, we'll contact you to discuss a solution. If it appears that a part or modification you've selected poses a problem on your particular firearm, the same standard applies If it's minor, we'll take care of it. If it affects the final product in any meaningful way, we'll talk about it before we take any action. As always, your satisfaction is my first concern. We want it to be right. If there's something you want done, and you don't see it listed here, feel free to call us and discuss it.