1895 Outback Guide Stainless Scout

The Grizzly Custom 1895 Outback Guide Stainless Scout rifle is a full-power, stainless steel .45-70 Government rifle featuring a full-length 6-round magazine tube. The rifle is capable of firing all .45-70 loads, up to and including the devastating Garrett 540 grain Hog Stompers. The rifle features laminated grey/black stocks with a basket weave Pachmayr Decelerator recoil pad to lessen felt recoil, which is re-contoured to facilitate easier mounting & dismounting. A set of rugged XS ghost ring sights are included for fast target acquisition, in addition to a Scout rail for optics. This package does NOT include the customer-provided rifle.

See this also: 1895 Trapper Guide Stainless Scout

The action has been completely massaged to eliminate any and all feeding or ejection issues, and to provide the smoothest operation possible. The trigger is reworked to give a clean break at approximately 3 pounds.

Here is a link to an article posted on September 14, 2017.

The sharp edges on the factory big loop lever have been dehorned for blood-free operation. The same applies to any sharp areas on the outside of the receiver as well, all dehorned and blended.

One of the weakest points of the Marlin lever action rifles is the receiver to butt stock connection, one pinch bolt at the rear of the tangs squeezing the stock. This weakness has been overcome by the installation of Grizzly’s through-bolt stock retention system, similar to that used in a Remington 870. The stock and forend are bedded to the rifle as well.

The final product is sighted-in at 50 yards prior to delivery. If optional optics are ordered, they are sighted-in as well.

The completed rifle weighs in at 7 pounds 4 ounces, has a length-of-pull of 13½”, and is 36½” long.

Categories: , Product ID: 1579


Package modifications and parts include the following:
  • Marlin 1895SBL Chambered in .45-70 Government
  • Barrel length 18.5 inches
  • Barrel recrowned w/11° target crown
  • 6-round, full-length magazine tube
  • Laminated stock, grey & black
  • Pachmayr Decelerator recoil pad, contoured for easier mounting & dismounting
  • Extensive action tuning to feed everything up to & including Garrett 540 grain Super Hard Cast loads
  • Trigger job on factory components
  • Dehorned factory large lever loop
  • Complete action dehorning
  • XS Sights ghost-ring rear sight
  • XS Sights ramped front sight with high visibility insert
  • XS Sights Scout scope rail
  • Stainless steel, finished in matte or factory style
  • Modified loading gate for easier loading
  • Extensive action smoothing
  • Bed stocks
  • Through-bolt stock retention system
  • Test fired & sighted-in

Additional information


Bobbed Hammer ($60), Factory Hammer ($0)

Trigger Shoe

Straightened & Smooth Shoe ($50), Factory Shoe ($0)


Fixed 2.5x FX-II Scout Scope ($450), Variable 1.5-5x VX-R Scout Scope ($750), No Optic ($0)


Two-Tone Cerakote ($400), Black Cerakote ($350), Standard Stainless ($0)


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.